Automatic Drip Irrigation System for Garden Flower Bed

Your recognition is our greatest support! The automatic drip device is widely used to water your vegetables, indoor and outdoor gardens, daily aquatic plants, potted plants, herbs, hanging baskets, washbasins, and hanging plants. This environmentally friendly PP material device comes in a set of 12 pieces, with each stake measuring 5.31 inches (13.5 cm) in length.

To use the device, follow these steps: 1. Place the control valve into the self-watering device. 2. Drill a hole at the bottom of the water bottle. 3. Put the watering device in the plastic bottle.

Before each use, adjust the water speed to the maximum and ensure there is no air in the dripping device. Slowly regulate the flow of water. To increase the dripping rate, loosen the valve, and to slow it down, tighten the valve. Make sure there is a hole in the bottom of the bottle to prevent water from running out without air pressure.

The plant watering device is equipped with an adjustable control valve, which can effectively control the watering speed. The water dripping speed can be adjusted from 0-60 seconds per drop of water, lasting for 1-15 days. Simply adjust the control valve to meet your requirements, and the operation is simple.

By correctly adjusting the control valve, you can provide different amounts of water for different plants and flowers, preventing over-watering. The device can fit most water bottles, with a suitable diameter of 0.8 to 1.1 inches, but it is not suitable for mineral water and purified water bottles.

The installation process is straightforward. You just need to drill a hole at the bottom of the water bottle, then tighten the bottle mouth and the device, and the automatic water drip device can operate normally.

To ensure your shopping experience, if you have any questions, please contact the seller, and they will provide you with a satisfactory answer in a timely manner.

product information: